ROBUST FOOD GRADE FORMULATION
Paratherm CE heat transfer fluid is formulated from highly refined basestocks and engineered for robust performance to 600°F in closed-loop liquid-phase heat transfer systems.
**Available in ASIAPAC and EU
OPERATING RANGE
| Minimum Startup (300cSt) | Maximum Operating Temp |
|---|---|
| 30°F (-1°C) | 600°F (316°C) |
FEATURES
- NSF HT-1 Food Grade heat transfer fluid
- Robust thermal stability for extended use
- Resists fouling from thermal cracking and oxidation
APPLICATIONS INCLUDE
- Industrial Drying Processes
- Plastics, Polymers & Textiles
- Food & Beverage Processing
- Extraction Sciences
PRESENTATIONS AVAILABLE
- Bulk in Tankwagons and Flexitanks
- 1000-liter totes
- 55-gallon (208-liter) drums
- 5-gallon (20-liter) Poly Pails
LACK OF COLOR DOES MAKE A DIFFERENCE
As shown by its almost water-white appearance, Paratherm CE Heat Transfer Fluid has an extremely low level of impurities. This is the result of the extended processing required to achieve it’s HT1 Rating-approved for incidental food contact by NSF-which removes the impurities that can catalyze fluid degradation. These impurities (such as aromatics, asphaltenes, and sulfur-bearing compounds) give lesser quality mineral-oil based fluids a slight to moderate yellow color.
LOW VAPOR PRESSURE EQUALS GREATER STABILITY IN VENTED EXPANSION TANKS
Any vapors that are given off by a heat transfer fluid inside a vented expansion tank will react with air to produce the acids that eventually can cause sludge formation and fluid gelling. The higher the vapor pressure, the more vapor is produced and the greater the rate of oxidation. Paratherm CE Heat Transfer Fluid has a negligible vapor pressure that produces almost no reaction with air in vented expansion tanks.
